| auxiliary contact composition | 1 NC |
| [Uimp] rated impulse withstand voltage | 6 kV coil not connected to the power circuit conforming to IEC 60947 |
| [Ui] rated insulation voltage | 690 V conforming to IEC 60947-4-1 |
| overvoltage category | III |
| Irms rated making capacity | 60 A at 440 V AC for power circuit conforming to IEC 60947-4-1 |
| rated breaking capacity | 48 A at 440 V for power circuit conforming to IEC 60947 |
| [Icw] rated short-time withstand current | 80 A 40 °C - 10 s for power circuit
45 A 40 °C - 60 s for power circuit
20 A 40 °C - 600 s for power circuit |
| associated fuse rating | 10 A gG at ≤ 690 V coordination type 1 for control circuit conforming to IEC 60947-5-1
12 A gG at ≤ 690 V coordination type 1 for power circuit |
| average impedance | 2.5 mOhm - Ith 20 A 50 Hz for power circuit |
| power dissipation per pole | 0.09 W AC-3
1 W AC-1 |
| control circuit voltage limits | Operational: 0.85...1.1 Uc at 50 Hz (at < 55 °C)
Drop-out: 0.3...0.6 Uc at 50 Hz (at < 55 °C) |
| operating time | 12...22 ms on closing
4...19 ms on opening |
| mechanical durability | 10000000 cycles |
| maximum operating rate | 1800 cyc/h 60 °C |
| inrush power in VA | 95 VA 50 Hz cos phi 0.75 (at 20 °C)
95 VA 60 Hz cos phi 0.75 (at 20 °C) |
| hold-in power consumption in VA | 8.5 VA 50 Hz cos phi 0.3 (at 20 °C)
8.5 VA 60 Hz cos phi 0.3 (at 20 °C) |
| heat dissipation | 2…3 W for control circuit |
| minimum switching current | 5 mA for control circuit |
| minimum switching voltage | 17 V for control circuit |
| non-overlap time | 1.5 ms on energisation guaranteed between NC and NO contact
1.5 ms on de-energisation guaranteed between NC and NO contact |
| insulation resistance | > 10 MOhm for control circuit |
| electrical durability | 1400000 cycles AC-3
150000 cycles AC-1 |
| mounting support | Plate
DIN rail |
| connections - terminals | Power circuit: screw clamp terminals 1 1…4 mm² - cable stiffness: flexible with cable end
Power circuit: screw clamp terminals 2 1…2.5 mm² - cable stiffness: flexible with cable end
Power circuit: screw clamp terminals 1 1…4 mm² - cable stiffness: solid without cable end
Power circuit: screw clamp terminals 2 1…4 mm² - cable stiffness: solid without cable end
Control circuit: screw clamp terminals 1 1…4 mm² - cable stiffness: flexible without cable end
Control circuit: screw clamp terminals 2 1…4 mm² - cable stiffness: flexible without cable end
Control circuit: screw clamp terminals 1 1…4 mm² - cable stiffness: flexible with cable end
Control circuit: screw clamp terminals 2 1…2.5 mm² - cable stiffness: flexible with cable end
Control circuit: screw clamp terminals 1 1…4 mm² - cable stiffness: solid without cable end
Control circuit: screw clamp terminals 2 1…4 mm² - cable stiffness: solid without cable end |
| Recommended tightening torque | Power circuit: 1.2 N.m
Control circuit: 1.2 N.m |
| Max tightening torque | Power circuit: 1.4 N.m
Control circuit: 1.4 N.m |