Login Check in
My Profile My orders Order payment
Compare Whishlist Cart

Power supply for DIN rail mounting DR-30-24

Model: 026.001.062
Power supply DR-30-24
Single output industrial power supply DR-30-24 is designed for DIN rail mounting TS-35/7.5 or 15. Can be used for devices with rated voltage 24VDC and maximum load 1,5A.
  • Protection against short circuits, overload, over voltage
  • Cooling by free air convection
  • LED indicatior for power ON
  • Isolation class II

Specification

Output characteristics
Rated voltage24 VDC
Rated current1.5 A
Current range0 … 1.5A
Rated power36 W
Ripple and noise (max)150 mVp-p
Voltage adjusting range21.6 … 26.4 V
Voltage tolerance±1%
Line regulation±1%
Load regulation±1%
Setup, rise time100ms, 30ms/230VAC   100ms, 30ms/115VAC at full load
Hold up time100ms/230VAC   21ms/115VC at full load
Input characteristics
Voltage range85 … 264VAC
Frequency range47 … 63Hz
Efficiency83%
AC current0.88A/115VAC    0.48A/230VAC
Inrush current (cold start)15A/115VAC    30A/230VAC
Environment
Operating temperature-20°C … +60°C
Operating humidity20 … 90% (non-condensing)
Storage temperature and humidity-40 … +85°C, 10 … 95%
Protection
Overload105 … 160% rated output power
Protection type: constant current limiting, recovers automatically after fault condition is removed
Over voltage27,6 … 32,4V
Protection type: shut down output voltage, re-power on to recover

Dimensions and terminal pin assignment

Power supply DR-30-24 dimensions
Terminal pin numberAssignment
1AC/N
2AC/L
3, 4+V
5, 6-V
7LED
8+V ADJ

Auxiliaries and accessories

Similar or replacement products