Login Check in
My Profile My orders Order payment
Compare Whishlist Cart

Power supply for DIN rail mounting DR-60-5

Model: 026.001.063
Power supply DR-60-5
Single output industrial power supply DR-60-5 is designed for DIN rail mounting TS-35/7.5 or 15. Can be used for devices with rated voltage 5VDC and maximum load 6.5A.
  • Protection against short circuits, overload, over voltage
  • Cooling by free air convection
  • LED indicatior for power ON
  • Isolation class II

Specification

Output characteristics
Rated voltage5VDC
Rated current6.5A
Current range0...6.5A
Rated power32.5W
Ripple and noise (max)80mVp-p
Voltage adjusting range4,75...5,5V
Voltage tolerance±2%
Line regulation±1%
Load regulation±1%
Setup, rise time100ms, 30ms/230VAC   200ms, 30ms/115VAC at full load
Hold up time100ms/230VAC   23ms/115VC at full load
Input characteristics
Voltage range88...264VAC
Frequency range47...63Hz
Efficiency76%
AC current1.2A/115VAC    0.8A/230VAC
Inrush current (cold start)18A/115VAC    36A/230VAC
Environment
Operating temperature-20°C...+60°C
Operating humidity20...90% (non-condensing)
Storage temperature and humidity-40...+85°C, 10...95%
Protection
Overload105...160% rated output power
Protection type: constant current limiting, recovers automatically after fault condition is removed
Over voltage5,75...6,9V
Protection type: shut down output voltage, re-power on to recover

Dimensions and terminal pin assignment

Power supply DR-60-5 dimensions
Terminal pin numberAssignment
1AC/N
2AC/L
3, 4+V
5, 6-V
7LED
8+V ADJ

Block diagram

Power supply DR-60-5

Auxiliaries and accessories for DR-60-5

Similar or replacement products DR-60-5