| Main |
|---|
| range of product | Zelio Logic |
| product or component type | Compact smart relay |
| Complementary |
|---|
| local display | With |
| number or control scheme lines | 0…500 with FBD programming
0…240 with ladder programming |
| cycle time | 6…90 ms |
| backup time | 10 years at 25 °C |
| clock drift | 6 s/month at 25 °C
12 min/year at 0…55 °C |
| checks | Program memory on each power up |
| [Us] rated supply voltage | 24 V DC |
| supply voltage limits | 19.2…30 V |
| supply current | 100 mA (without extension) |
| power dissipation in W | 3 W without extension |
| reverse polarity protection | With |
| discrete input number | 8 conforming to EN/IEC 61131-2 type 1 |
| discrete input type | Resistive |
| discrete input voltage | 24 V DC |
| discrete input current | 4 mA |
| counting frequency | 1 kHz for discrete input |
| voltage state 1 guaranteed | ⩾15 V for I1…IA and IH…IR discrete input circuit
⩾15 V for IB…IG used as discrete input circuit |
| voltage state 0 guaranteed | ⩽ 5 V for I1…IA and IH…IR discrete input circuit
⩽ 5 V for IB…IG used as discrete input circuit |
| current state 1 guaranteed | ⩾ 1.2 mA for IB…IG used as discrete input circuit
⩾ 2.2 mA for I1…IA and IH…IR discrete input circuit |
| current state 0 guaranteed | ⩽ 0.5 mA for IB…IG used as discrete input circuit
⩽ 0.75 mA for I1…IA and IH…IR discrete input circuit |
| input compatibility | 3-wire proximity sensors PNP (discrete input) |
| analogue input number | 4 |
| analogue input type | Common mode |
| analogue input range | 0…10 V
0…24 V |
| maximum permissible voltage | 30 V (analogue input circuit) |
| analogue input resolution | 8 bits |
| LSB value | 39 mV (analogue input circuit) |
| conversion time | Smart relay cycle time for analogue input circuit |
| conversion error | ±5 % at 25 °C for analogue input circuit
± 6.2 % at 55 °C for analogue input circuit |
| repeat accuracy | ± 2 % at 55 °C for analogue input circuit |
| operating distance | 10 m between stations, with screened cable (sensor not isolated) for analogue input circuit |
| input impedance | 12 kOhm (IB…IG used as analogue input circuit)
12 kOhm (IB…IG used as discrete input circuit)
7.4 kOhm (I1…IA and IH…IR discrete input circuit) |
| number of outputs | 4 relay output(s) |
| output voltage limits | 24…250 V AC (relay output)
5…30 V DC (relay output) |
| contacts type and composition | NO for relay output |
| output thermal current | 8 A for all 4 outputs (relay output) |
| electrical durability | 500000 cycles AC-12 at 230 V, 1.5 A for relay output conforming to EN/IEC 60947-5-1
500000 cycles AC-15 at 230 V, 0.9 A for relay output conforming to EN/IEC 60947-5-1
500000 cycles DC-12 at 24 V, 1.5 A for relay output conforming to EN/IEC 60947-5-1
500000 cycles DC-13 at 24 V, 0.6 A for relay output conforming to EN/IEC 60947-5-1 |
| switching capacity in mA | ⩾ 10 mA at 12 V (relay output) |
| operating rate in Hz | 0.1 Hz (at Ie) for relay output
10 Hz (no load) for relay output |
| mechanical durability | 10000000 cycles (relay output) |
| [Uimp] rated impulse withstand voltage | 4 kV conforming to EN/IEC 60947-1 and EN/IEC 60664-1 |
| clock | With |
| response time | 10 ms (from state 0 to state 1) for relay output
5 ms (from state 1 to state 0) for relay output |
| connections - terminals | Screw terminals, clamping capacity: 1 x 0.2…1 x 2.5 mm² AWG 25…AWG 14 semi-solid
Screw terminals, clamping capacity: 1 x 0.2…1 x 2.5 mm² AWG 25…AWG 14 solid
Screw terminals, clamping capacity: 1 x 0.25…1 x 2.5 mm² AWG 24…AWG 14 flexible with cable end
Screw terminals, clamping capacity: 2 x 0.2…2 x 1.5 mm² AWG 24…AWG 16 solid
Screw terminals, clamping capacity: 2 x 0.25…2 x 0.75 mm² AWG 24…AWG 18 flexible with cable end |
| tightening torque | 0.5 N.m |
| overvoltage category | III conforming to EN/IEC 60664-1 |
| product weight | 0.25 kg |
| Environment |
|---|
| immunity to microbreaks | ⩽ 1 ms |
| product certifications | CSA
C-Tick
GL
GOST
UL |
| standards | EN/IEC 60068-2-27 Ea
EN/IEC 60068-2-6 Fc
EN/IEC 61000-4-11
EN/IEC 61000-4-12
EN/IEC 61000-4-2 level 3
EN/IEC 61000-4-3
EN/IEC 61000-4-4 level 3
EN/IEC 61000-4-5
EN/IEC 61000-4-6 level 3 |
| IP degree of protection | IP20 (terminal block) conforming to IEC 60529
IP40 (front panel) conforming to IEC 60529 |
| environmental characteristic | EMC directive conforming to EN/IEC 61000-6-2
EMC directive conforming to EN/IEC 61000-6-3
EMC directive conforming to EN/IEC 61000-6-4
EMC directive conforming to EN/IEC 61131-2 zone B
Low voltage directive conforming to EN/IEC 61131-2 |
| disturbance radiated/conducted | Class B conforming to EN 55022-11 group 1 |
| pollution degree | 2 conforming to EN/IEC 61131-2 |
| ambient air temperature for operation | -20…40 °C in non-ventilated enclosure conforming to IEC 60068-2-1 and IEC 60068-2-2
-20…55 °C conforming to IEC 60068-2-1 and IEC 60068-2-2 |
| ambient air temperature for storage | -40…70 °C |
| operating altitude | 2000 m |
| altitude transport | ⩽ 3048 m |
| relative humidity | 95 % without condensation or dripping water |
