| Main |
|---|
| range of product | Zelio Logic |
| product or component type | Modular smart relay |
| Complementary |
|---|
| local display | With |
| number or control scheme lines | 0…500 with FBD programming
0…240 with ladder programming |
| cycle time | 6…90 ms |
| backup time | 10 years at 25 °C |
| clock drift | 12 min/year at 0…55 °C
6 s/month at 25 °C |
| checks | Program memory on each power up |
| [Us] rated supply voltage | 24 V |
| supply voltage limits | 19.2…30 V |
| maximum supply current | 190 mA (without extension)
300 mA (with extensions) |
| power dissipation in W | 10 W with extensions
6 W without extension |
| reverse polarity protection | With |
| discrete input number | 16 conforming to EN/IEC 61131-2 type 1 |
| discrete input type | Resistive |
| discrete input voltage | 24 V DC |
| discrete input current | 4 mA |
| counting frequency | 1 kHz for discrete input |
| voltage state 1 guaranteed | >= 15 V for I1…IA and IH…IR discrete input circuit
>= 15 V for IB…IG used as discrete input circuit |
| voltage state 0 guaranteed | ≤ 5 V for I1…IA and IH…IR discrete input circuit
≤ 5 V for IB…IG used as discrete input circuit |
| current state 1 guaranteed | >= 1.2 mA (IB…IG used as discrete input circuit)
>= 2.2 mA (I1…IA and IH…IR discrete input circuit) |
| current state 0 guaranteed | ≤ 0.5 mA (IB…IG used as discrete input circuit)
≤ 0.75 mA (I1…IA and IH…IR discrete input circuit) |
| input compatibility | 3-wire proximity sensors PNP for discrete input |
| analogue input number | 6 |
| analogue input type | Common mode |
| analogue input range | 0…10 V
0…24 V |
| maximum permissible voltage | 30 V for analogue input circuit |
| analogue input resolution | 8 bits |
| LSB value | 39 mV for analogue input circuit |
| conversion time | Smart relay cycle time for analogue input circuit |
| conversion error | +/- 5 % at 25 °C for analogue input circuit
+/- 6.2 % at 55 °C for analogue input circuit |
| repeat accuracy | +/- 2 % at 55 °C for analogue input circuit |
| operating distance | 10 m between stations, with screened cable (sensor not isolated) for analogue input circuit |
| input impedance | 12 kOhm for IB…IG used as analogue input circuit
12 kOhm for IB…IG used as discrete input circuit
7.4 kOhm for I1…IA and IH…IR discrete input circuit |
| number of outputs | 10 relay |
| output voltage limits | 24…250 V AC (relay output)
5…30 V DC (relay output) |
| contacts type and composition | NO for relay output |
| output thermal current | 5 A for 2 outputs for relay output
8 A for 8 outputs for relay output |
| electrical durability | AC-12: 500000 cycles at 230 V, 1.5 A for relay output conforming to EN/IEC 60947-5-1
AC-15: 500000 cycles at 230 V, 0.9 A for relay output conforming to EN/IEC 60947-5-1
DC-12: 500000 cycles at 24 V, 1.5 A for relay output conforming to EN/IEC 60947-5-1
DC-13: 500000 cycles at 24 V, 0.6 A for relay output conforming to EN/IEC 60947-5-1 |
| switching capacity in mA | >= 10 mA at 12 V (relay output) |
| operating rate in Hz | 0.1 Hz (at Ie) for relay output
10 Hz (no load) for relay output |
| mechanical durability | 10000000 cycles for relay output |
| [Uimp] rated impulse withstand voltage | 4 kV EN/IEC 60947-1 and EN/IEC 60664-1 |
| clock | With |
| response time | 10 ms (from state 0 to state 1) for relay output
5 ms (from state 1 to state 0) for relay output |
| connections - terminals | Screw terminals, 1 x 0.2…1 x 2.5 mm² (AWG 25…AWG 14) semi-solid
Screw terminals, 1 x 0.2…1 x 2.5 mm² (AWG 25…AWG 14) solid
Screw terminals, 1 x 0.25…1 x 2.5 mm² (AWG 24…AWG 14) flexible with cable end
Screw terminals, 2 x 0.2…2 x 1.5 mm² (AWG 24…AWG 16) solid
Screw terminals, 2 x 0.25…2 x 0.75 mm² (AWG 24…AWG 18) flexible with cable end |
| tightening torque | 0.5 N.m |
| overvoltage category | III conforming to EN/IEC 60664-1 |
| net weight | 0.4 kg |
